HD-52518 is a HDPE copolymer which manufactured by gas phase process.
This grade is suitable Injection molding for application requiring a good balance between easy of processability and flowability and mechanical properties.
| Physical | Nominal Value (SI) |
|---|---|
| Density | 0.952g/cm |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 18g/10 min |
| Mechanical | Nominal Value (SI) |
| Flexural Modulus | 1350MPa |
| Impact | Nominal Value (SI) |
| Notched lzod Impact (73°F (23°C)) | 25J/m |
| Thermal | Nominal Value (SI) |
| Vicat Softening Temperature | 122°C |
Application
Housewares
High fluidity
Boxes
Compounding
Packing
Pellet in 25Kg PE Bag on pallet
Other Names
High Density Polyethylene
Chemical Formula
-(CH2—CH2)-
Request for TDS and more information :
Mr.Motazedi – Technical Expert – Polymers Products
Tel/Whatsapp: +989122596718