R200 is an EPS class that can be produced in density ranges between 13kg/m³ – 25kg/m³ suitable for high quality block molding and shape molding with a section thickness of 15 mm and higher.
R200 is used for packaging, insulation applications that do not require fire classification, industrial applications and shape molding applications with impact absorber.
Characteristics
| Property Bead Size – Diameter 1.4 – 0.9 mm | Test Method ASTM D 10-1238 |
|---|---|
| Blowing Agent – Pentane 7 – 5.6 % | ASTM D 5630 |
| Residual Styrene Monomer Less than 1000ppm | ASTM D 1505 |
| Moisture Content Less than %0.4 | BCS METHOD |
| CFC Content Nil | ASTM D6980 |
Application
- R200, is an EPS class, in accordance with REACH regulative, which can be used in production of EPS
- foam typically in density ranges between 20 – 12 kg/m3 suitable for high quality block molding and
- shape molding.
- R200 is used for food contact and other packaging variety, insulation applications is not requiring fire
- classification, for industrial application, and shape molding applications with impact absorber.
Lower densities can be achieved by multiple expansions
Packing
1250 kg big bag with inside gas barrier liner
1000 kg big bag with inside gas barrier liner
750 kg big bag with inside gas barrier liner
1150 kg octabins are in preparation
Storage
R200 Should be stored in well – ventilated storage areas with a temperature preferably not exceeding °25C.
It should be protected against unsuitable weather conditions and direct sun light. Partially used containers should be close as tight as original conditions and should be consumed in a short time.
In order to maintain the expansion potential, it is recommended to use material within one month after delivery.